Can-am Upgrades and Accessories ...
Gristle Boyz Heavy Duty Outlander Bumper
The new Gristle Boyz Heavy Duty Outlander Bumper. Made of 1 1/2" heavy wall steel that will stand up to the extreme abuse of the avid ATV rider. It is also powder coated for great looks and durability. give Gristle Boyz a call to order yours today.
$389.00 + GST
Gristle Boyz Renegade Rear Rack
The new Gristle Boyz Renegade Rear Rack is perfect addition for the riders wanting the sporty look of the Renegade meanwhile also having the versatility of a ATV with racks. The Gristle Boyz Renegade Rack was also designed to carry the Can-Am Premium Modular Bag. The Gristle Boyz Renegade Rack is made of 1" Chromoly Tubing for heavy load applications and powder coated for great looks and durability. Give Gristle Boyz a call to order yours today.
$419.00 + GST
2009 Can-am Outlander/ Renegade 800r Air filter kit
This is a simple setup to enable you to Run an aftermark Airfilter on your 09 Can-am.
The kit comes with an Aluminum elbow and a Uni Air filter.
$115.00 + GST
07-09 Can-am Renegade Long travel Suspension System GB-34LT
This is a new product to Gristle Boyz designed for 2 different styles of riding. The first and most popular will be the wide and low stance for high speed Back country riding where most control and stability is needed along with very plush progressive suspension. The second riding style would be for those that want more ground clearance and tire clearance without the need to cut plastic to make fit. Both of these styles of riding can be easily changed from one to another just by adjusting spring tension on stock or Aftermarket shocks to fit each riding style. With this kit the renegade will sit 3 inches higher then stock when shocks are fully extended and also be 4 inches wider. The kit includes 4 Gorilla-axles with one year warranty, both top and bottom A-arms built with Chromalloy tubing Stainless steel tie rods. The rear trailing are were designed for the rear axle to sit 2 inches longer for up to a 32 inch tire to fit with no fender trimming. The kit is then powder coated Black or any other color of preference.
Using the stock a-arm bushing design with grease nipples if bushings should ware after time OEM bushing will be easily accessible from local dealer. We recommend using at least the Factory X shock for best result.
$3760.00 + GST with Trailing arm core
$4160.00 + GST without trailing arm core
07-09 Can-am Renegade Drag racing 8" stretch kit GB-8Sk
This is a product designed for full out strait line racers or those that want to be low, long and wide for other types of racing and riding. The kit comes with 8” diff stretch plates, longer trailing arms, 2 Gorilla-axles, longer rear prop shaft, and a new rear break line, upper shock mounts. This kit will make the Renegade sit 6 inches wider then stock. With this kit combined with our front Diff Delete kit will have your Renegade will be set for Drag racing weather on Street, sand or dirt.
$2400.00 + GST with trailing arm Core
$2800.00 + GST without trailing arm core
07-09 Can-am Renegade Front Diff Delete kit
This is for those that do not know where the 4wd switch is on their machine and want to shave close to 50 lbs off the front of the Renegade this kit is an easy way to convert your 4x4 to a 2x4 with a Differential replacement brace and 2 stub shafts to replace the front CV joins to keep the bearings and spindles together. The kit will use all factory bolts and nuts to install.
$650.00 + GST
07/09 Can-am Renegade/Outlander 92hp Turbo kit
2009 Can-am Renegade/Outlander 125hp Turbo kit
Gristle Boyz Turbo Kits are designed for use on the 07-09 Can-am Renegade and Outlander 800. Great for street racing, competitive drag racing, Mud Racing, and even rippin' up the dunes. This turbo kit dominates in every application. Gristle Boyz Turbo Kit is designed to utilize the factory Fuel Injection System along with a Dynojet Power commander. The base kit features a Garrett GT12 Turbo, and tig-welded stainless steel turbo headers with Rear exit pipe, ceramic coated for great looks and protection. This kit was designed for use with any aftermarket slip-on or our custom built straight or snorkled stainless tip slip-on pipes. The kit also includes built in Garrett adjustable waste gate, Turbosmart variable boost controller and Blow off valve, along with all the necessary gaskets, fittings, lines and hardware for installation. This kit will give you a 50% hp gain with no internal engine work. Canadian Dealers welcome.
Part Numbers GB-C800TK07/08 GB-C800TK09
$3995.00 + GST
07/08 Can-am Renegade Winch Bumper
 
The new Gristle Boyz winch bumper is built to serve all your Hardcore 4x4 and Trail Riding needs. Made of pure steel that will not bend or break, powder coated for great looks and durability. This heavy duty bumper can mount up to a 3500lbs winch, using this combination will get you and your machine out of the biggest mud holes you can find. Give Gristle Boyz a call to get your bumper today.
Part Number GB-C800WB
$349.00 + GST
Gristle Boyz HD Aluminum Hawse Fairlead
 This fairlead is designed for use with the Gristle Boyz winch bumper and any synthetic rope winches. Gristle Boyz engraved for great looks.
Available now
$70.00 + GST
07/09 Slip-on straight pipe for Outlander/Renegade with 4inch Stainless Tip
 
Part Number GB-C800ss
$150.00 + GST
07/09 Slip-on Straight Swamp pipe for Renegade/Outlander with 3” stainless tip
Coming soon
Part Number GB-C800sw
$150.00 + GST
07/09 Swamp Series Intake for Gristle Boyz turbo kit
This is a great upgrade for your existing turbo kit if your are planning to play in some deep water, Kit comes with everything needed including a UNI filter and pre filter.
Part numbers GB-C800TKRSI GB-C800TKORI
$220.00 + GST
07-09 Dyno-jet PClll Power commanders Renegade/Outlander
PClll-USB 621-411 Renegade 800
PClll-USB
$395.00 + GST
Autometer Pro comp Liquid filled boost 2 5/8 Gauge
Designed and proven to be the most durable gauges on the planet, liquid filled mechanical gauges use our standard top of the line and extremely durable 270 degree sweep Pro-Comp mechanical gauge movements and fill them with a liquid silicone compound for extreme vibration dampening and smooth pointer movement. These gauges are proven to give steady and accurate readings in the harshest of competition environments including NHRA Top Fuel Funny Car, Baja 1000, Off-Shore Marine, and speeds in excess of 400mph on the Bonneville salt flats to name a few.
Part number 5401
$79.72 + GST
Autometer Pro comp Pyrometer 2 5/8 Gauge
Full sweet electric Gauge is great for keeping a close eye on exhaust temps when pushing Turbo engines hard.
Part Number 5453
$124.80 + GST
Autometer Wideband Air/Fuel Ratio Gauge
Includes 8 ft. tubing or wiring harness. LED digital display. 0-4v data output feed for ECU, data acquisition unit, or Laptop tuning. Auto-Dimming gauge brightness feature. Includes high-quality Bosch wideband O2 sensor. Display data in Lambda or numerical A/F ratio. User programmable range. Peak recall/memory. 10:1 to 20:1 AFR Range for Gasoline Applications. Adjustable for Alternate Fuel Types (Ethanol, Methanol, Propane, CNG). 6:1 to 18:1 AFR Range for Alternate Fuel Types. User Programmable Warning Function. This product has no provision for dial illumination/backlighting.
Part Number 5978
$337.35 + GST
Autometer Carbon fiber 2 5/8 Gauge pod
For use with 2 5/8" Auto Meter Mechanical Gauges Only.
Part number 2152
$46.92 + GST
E-Boost2 Boost controller
60 mm and 66 mm. Black Face/Black Bezel combination. Back-lit, auto-dimming display. Available in 60mm and 66mm (2,5/8") models, 40 or 60psi options. Suits most turbocharged street and race cars. Supplied with Solenoid, mounting bracket, hoses, fittings and all the neccessary installation hardware.
Product Numbers: 60mm, 40psi TS-0301-1003, 60psi: S-0301-100866mm (2,5/8"), 40psi: TS-0301-1011, 60psi: TS-0301-1012
$575.04 + GST
Turbosmart In cabin Boost controller
Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a breeze. Gated System brings boost on faster. Suitable for all turbocharged vehicles.
Part Number: TS-0106-1002
$152.64 + GST
Turbosmart V-port Blow off Valve
Features a variable exhaust port system, providing superior venting of excess pressure. Simple and effective. Small footprint makes it an ideal choice for larger capacity, space-restricted engines. Preferred choice of drifting and circuit enthusiasts.
Product Number: FG-BOV-002VP-S
$219.84 + GST
Turbosmart Plumb-back Blow off Valve
Fully recirculating valve. A quiet alternative to the atmospheric BOV, the Plumb Back systems vents all excess pressure back into the intake system or out of a confined area. Ideal for cars with sensitive Air-Flow systems and off-road applications as the fully-sealed design of the Plumb Back prevents any foreign matter entering the system. Supplied with Weld-on adapter. Proper plumbing for through Air filter lid exhaust. Available in a range of outlet diameters.
FG-BOV-003PB25-S, FG-BOV-003PB29-S FG-BOV-003PB32-S, FG-BOV-003PB34-S, FG-BOV-003PB38-S
$267.84 + GST
EPI Primary and Secondary Clutch springs
| Primary Springs |
|---|
| Colour | Part # | 2-1/4" Load | 1-1/4" Load |
| Purple | BCS20 | 132 lbs | 182 lbs |
| Yellow | BCS21 | 105 lbs | 145 lbs |
| White | BCS22 | 91 lbs | 155 lbs |
| Orange | BCS23 | 87 lbs | 140 lbs |
| Red | BCS24 | 54 lbs | 140 lbs |
| Gold | BCS25 | 47 lbs | 135 lbs |
| Secondary Springs |
|---|
| Colour | Part # | 2.9" Load | 1.9" Load |
| Blue | SRER13 | 175 lbs | 240 lbs |
| Red | SRER12 | 155 lbs | 215 lbs |
| Orange | SRER10 | 75 lbs | 91 lbs |
All Springs $48.00 + GST
07-09 Can-am Renegade/Outlander Rear Prop shaft
This is a HD Rear prop shaft is for the Can-am’s with really big tires or really big power or even both, Solid shaft design to never break ever. 3 piece shaft Comes with u-joints.
Part Number GB-C800PS
$650.00 + GST
$250.00 + GST (if you send us your old shaft)
07/09 Can-am Outlander 2nd Rad on Rack Mount
This a low mount rad kit that is for guys that continuously have over heating problems with there outlander. Kit comes with everything needed to mount a second radiator on the rack of an outlander including Stock replacement rad, Fan and shroud. Just brackets also available.
Part numbers GB-C800RMB GB-C800RMK
Rad mount kit $625.00 + GST
Rad mount Brackets $200.00 + GST
07/09 Can-am Renegade/Outlander Reverse over-ride kit
This is an easy install anyone can do to get rid of the annoying Over-ride button when your trying to get out of a mud hole in reverse. Availible for 500/650/800.
Part Number GB-C800RO
$20.00 + GST
07/09 Can-am Renegade 5 inch Gorilla-axle lift kit
This is a Gorilla-axle 7inch Outlander lift modified to fit the Renegade everything included.
$3600.00 + GST
07-09 Can-am Outlander Gorilla-axle 7 inch lift
This kit comes with axles, a-arms, trailing arms and everything else to lift your Outlander.
Part Number GL-C800
$4100.00 + GST
Gorilla-axle silverback tire
GA-T 32x10x14 - $280 + GST
GA-T 30x11x14 - $258 + GST
GA-T 30x9x914 - $246 + GST
GA-T 28x12x12 - $234 + GST
GA-T 28x10x12 - $222 + GST
GA-T 27x12x12 - $210 + GST
GA-T 27x10x12 - $198 + GST
|
 |
